Channel Spec Table

Channel Specifications — 27 sizes
KS D 3502JIS G 3192

KSJISChannel

9 sizes

The dimensions below are identical across KS D 3502 · JIS G 3192.

NominalHBt1t2WeightCycm
C75×407540576.921.28
C100×501005057.59.361.54
C125×65125656813.41.9
C150×75150756.51018.62.28
C180×7518075710.521.42.13
C200×80200807.51124.62.21
C250×902509091334.62.4
C300×903009091338.12.22
C380×10038010010.51654.52.41

C/U-section channel steel used for beams, guide rails, and structural reinforcements.

Practical Notes

  • Asymmetric cross-section — watch for torsion under load. Using paired channels face-to-face cancels torsion effects.
  • For guide rail use, check inner flange squareness. Poor squareness degrades guide precision.

Selection Guide

C/U-section channel steel for beams, guide rails, and structural reinforcements. Asymmetric cross-section requires attention to load direction.

Key Features

  • C-shaped (channel) cross-section; open on one side for pipe/cable support
  • KS D 3502; 75×40–380×100 mm; SS400/SM490 material
  • Asymmetric cross-section puts shear center outside web; eccentric load must be considered

Key Applications

Pipe supports, cable tray rails, machine base frames, stair side plates, signage structures

FAQ

How is channel size notation read?

C×A×tw×tf where C=height, A=width, tw=web thickness, tf=flange thickness. E.g., C100×50×5×7.5 means 100mm height, 50mm width.

Bookmark this site!
PC: Ctrl + D
Mobile: Browser menu → Add bookmark