Ad
Round Nut Spec Table
Round Nut Specifications — 6 sizes
KS B 1019
KSRound Nut
6 sizes| Nominal | d | P | DOD | HHeight | Slots |
|---|---|---|---|---|---|
| M10×1 | 10 | 1 | 22 | 5 | 4 |
| M12×1.5 | 12 | 1.5 | 25 | 6 | 4 |
| M16×1.5 | 16 | 1.5 | 30 | 6 | 4 |
| M20×1.5 | 20 | 1.5 | 38 | 8 | 4 |
| M25×1.5 | 25 | 1.5 | 45 | 8 | 4 |
| M30×1.5 | 30 | 1.5 | 52 | 10 | 6 |
A round nut tightened with a spanner slot or pin holes, used for bearing retention and shaft positioning.
Practical Notes
- Always use with lock washers (tab washers). Without them, vibration loosens the nut and disturbs bearing preload.
- Use hook or pin spanners. Hammering with a chisel damages the nut and prevents precision adjustment.
Selection Guide
For bearing preload adjustment, ball screw locking, and spindle shaft positioning. Tightened with hook or pin spanners; must be used with lock washers (tab washers) to prevent loosening.
Key Features
- Round exterior with peripheral notches/holes for hook spanner or pin spanner
- KS B 1024; thin profile optimized for sleeve and bearing preload adjustment
- Used with lock washer (tab washer) for anti-loosening; allows fine position adjustment
Key Applications
Spindle bearing preload, ball screw nut locking, hydraulic cylinder piston rods, machine tool spindles, reducer shafts
FAQ
How to lock round nuts?
Bend the tab washer tab into the nut slot for physical anti-loosening. Threadlocker is supplementary only — always use with tab washers.